Home / RBT Study Guide / Behavior acquisition: RBT exam domain C, task by task
Domain C · 19 questions · 25% of the exam
Behavior acquisition: RBT exam domain C, task by task
Behavior Acquisition is the largest domain on the RBT exam: 19 of the 75 scored questions, or 25 percent. Its 11 tasks cover how you teach new skills, from delivering reinforcement to running trials, prompting, shaping and making skills last.
Last reviewed November 10, 2026 against the BACB RBT Test Content Outline (3rd ed.)
What domain C covers and why it carries the most weight
Behavior Acquisition is the largest domain on the RBT Test Content Outline (3rd edition): 19 of the 75 scored questions, or 25 percent of the exam. It is about teaching new skills: how you deliver reinforcement, how you run teaching trials, how you prompt and fade, and how you make a skill last outside the teaching session.
The domain has 11 tasks, C.1 through C.11. Ten of them begin with the word "implement". That word is the key to the whole domain. Your supervisor (a BCBA or BCaBA) designs the teaching program, chooses the targets and decides when a procedure changes. You run the program as written, collect the data and report what you see. An answer choice that has the RBT redesigning a procedure alone does not fit the RBT role.
This page takes the tasks in order and links to a deeper page for each one.
Reinforcement: C.1 and C.2
C.1 Positive and negative reinforcement
Reinforcement is any consequence that makes a behavior more likely in the future. In positive reinforcement something is added after the behavior (praise, a toy, a token). In negative reinforcement something is removed (a demand, a loud noise). Both increase behavior. The outline says you deliver reinforcement immediately, contingently and according to a schedule, and along dimensions such as magnitude, intensity and variety.
Three pages go deeper: reinforcement vs punishment for the four contingencies, schedules of reinforcement for FR, VR, FI and VI, and motivating operations for why a reinforcer works one hour and not the next.
Common mix-up
Negative reinforcement is not punishment. If the behavior increased, it was reinforced, even when something unpleasant was involved.
C.2 Conditioned reinforcers
A conditioned reinforcer became valuable through learning, by being paired with things that were already reinforcing. Praise, stickers, points and tokens are common examples. To establish one, you present the new item together with an established reinforcer, many times, until the new item works by itself. If your plan says to give praise every time you hand over a snack, that pairing is the procedure. See conditioned reinforcers and token economies.
Teaching formats: C.3, C.4 and C.5
C.3 Discrete-trial teaching
A discrete trial is a short, structured teaching unit with a clear start and end: an instruction (the discriminative stimulus, or SD), a prompt if needed, the learner's response, a consequence, and a brief pause before the next trial. You run many trials in a short time and record data on each one.
In session
You say "touch nose". Sam touches his nose. You say "That's it", hand him a token, mark a plus, wait three seconds and begin the next trial.
The full breakdown, with a worked example of three trials, is in discrete-trial teaching.
C.4 Naturalistic teaching
Naturalistic teaching happens inside play and daily routines. It follows the learner's interest and uses a reinforcer that fits the response: asking for the ball gets the ball. The outline names natural environment teaching and incidental teaching. In incidental teaching you wait for the learner to initiate, prompt a slightly better response, then give access. To tell this from C.3, ask who started the interaction and what the reinforcer was. See naturalistic teaching.
C.5 Task analysis and chaining
A task analysis breaks a multistep skill, such as washing hands, into small teachable steps. Chaining teaches those steps as a sequence. The outline lists three versions:
- Forward chaining: teach the first step first, then add steps in order.
- Backward chaining: you help with every step except the last, which the learner does alone and is reinforced. Then the last two, and so on.
- Total task: the learner practices every step each time, with help on any step that needs it.
Details and examples are in task analysis and chaining.
Stimulus control and prompts: C.6 and C.7
C.6 Discrimination training
Discrimination training teaches a learner to respond in the presence of one stimulus and not in the presence of others. You reinforce the response when the SD is present and do not reinforce it when the S-delta is present. With a cup and a spoon on the table and the instruction "find cup", touching the cup is reinforced and touching the spoon is not. The result is called stimulus control. See discrimination training.
C.7 Prompts and prompt fading
A prompt is extra help that makes the correct response more likely. Response prompts act on the learner's behavior: verbal, gestural, model and physical prompts. Stimulus prompts change the materials: moving the correct item closer, or making it bigger or brighter.
Prompts must be faded so the learner responds to the instruction alone and does not become prompt dependent. The outline's examples are errorless teaching (prompting early so errors rarely occur, then reducing help), least-to-most prompting, stimulus fading and time delay. The plan tells you which prompt to use and how to fade it. See prompting and prompt fading.
On the exam
For prompt questions, note the order of help. Less help first and more only if needed is least-to-most. Full help first and less over time is most-to-least. A wait between the instruction and the prompt is time delay.
Making skills last: C.8 and C.9
C.8 Generalization
A skill has generalized when it shows up across settings, people and materials that were not all directly taught. You implement generalization procedures by running the program as the plan directs in different rooms, with different people and with different examples.
In session
Ava greets you every morning but not her grandmother or her teacher. Her plan adds greeting practice with three different adults in three places, and you run it with each one.
C.9 Maintenance vs acquisition
Acquisition procedures teach a skill the learner does not yet have: frequent teaching trials, prompts and dense reinforcement. Maintenance procedures keep a mastered skill going over time: occasional checks, thinner reinforcement and more natural reinforcers. Task C.9 asks you to tell the two apart. The plan's mastery criterion and your supervisor decide when a target moves from one to the other. Both C.8 and C.9 are covered in generalization and maintenance.
Shaping and token systems: C.10 and C.11
C.10 Shaping
Shaping means reinforcing successive approximations of a target behavior. You reinforce a response that is a little closer to the goal, and once that response is reliable you stop reinforcing the earlier one and wait for the next step. A learner might move from "buh" to "bub" to "bubbles". Shaping changes one behavior gradually. Chaining links several different behaviors in order. See shaping.
C.11 Token economies
In a token economy the learner earns tokens for defined target behaviors and trades them for backup reinforcers. The token is a conditioned reinforcer, which ties this task back to C.2. Your part is to deliver each token right away, only for the behaviors on the list, and to run the exchange as scheduled. You remove tokens only if the plan includes that. See conditioned reinforcers and token economies.
How to work through a domain C question
Many questions in this domain describe a short session scene and ask you to name the procedure or choose what the RBT does next. A few habits help:
- Find the behavior and what followed it. Added or removed, more or less in the future. That settles most reinforcement questions.
- Ask who started the interaction. Instructor-led with planned trials points to discrete-trial teaching. Learner-led with a natural reinforcer points to naturalistic teaching.
- Count the behaviors. One behavior changing bit by bit is shaping. A sequence of steps is chaining.
- Ask whether the skill is new or already mastered. That separates acquisition from maintenance.
- Check the RBT's role. When a procedure is not working, the RBT keeps implementing the plan, records accurate data and tells the supervisor.
Many of the same ideas return in domain D, where reinforcement is used to reduce challenging behavior. See the behavior reduction overview, and use the glossary for any term on this page that is still unfamiliar.
Practice questions
Original questions in the style of the exam. Pick an answer before you open the explanation.
1. Sam's plan says to hand him a token right after each correct response. His RBT finishes writing the data first and gives the token about a minute later, after Sam has started tapping the table. Which feature of effective reinforcement was missed?
- Magnitude
- Variety
- Immediacy
- Contingency
Show answer
C. Immediacy
The token came too late, so the problem is immediacy, and the delay risks reinforcing table tapping. Contingency was kept, because the token was still given only for a correct response.
2. Priya is learning to wash her hands. The RBT guides her through every step except the last one, drying, which Priya does alone before getting praise. Later she will do the last two steps alone. Which procedure is this?
- Backward chaining
- Forward chaining
- Total task chaining
- Stimulus fading
Show answer
A. Backward chaining
Teaching the last step first and then working toward the start of the task is backward chaining. Forward chaining would begin with the first step, turning on the water.
3. Noor is learning to say 'water'. Her RBT first reinforces 'w', then only 'wa', then only 'wata', and finally only 'water'. Which procedure is this?
- Chaining
- Shaping
- Fading
- Modeling
Show answer
B. Shaping
Reinforcing closer and closer approximations of one target behavior is shaping. Chaining links several different behaviors into a sequence, which is not what is happening here.
4. Diego met the mastery criterion for tying his shoes last month. His plan now has the RBT check the skill once a week, in the same room with the same shoes, with occasional praise. What does this describe?
- An acquisition procedure
- A generalization procedure
- A discrimination procedure
- A maintenance procedure
Show answer
D. A maintenance procedure
Checking a mastered skill over time with thinner reinforcement is a maintenance procedure. It is not generalization, because the setting, materials and person have not changed.
5. Leo's RBT gives an instruction and waits. If Leo does not respond, she gestures. If he still does not respond, she models the response, and only then uses physical guidance. Which prompting procedure is this?
- Least-to-most prompting
- Most-to-least prompting
- Constant time delay
- Stimulus prompt fading
Show answer
A. Least-to-most prompting
Starting with the least help and adding more only as needed is least-to-most prompting. Most-to-least runs in the opposite order, starting with full help and reducing it.
Common questions
How many questions on the RBT exam are about behavior acquisition?
The RBT Test Content Outline (3rd edition) assigns 19 of the 75 scored questions to Behavior Acquisition, which is 25 percent of the exam. It is the largest of the six domains.
What is behavior acquisition in ABA?
Behavior acquisition means teaching new skills, such as communicating, playing, self-care and following directions. For an RBT it covers implementing the teaching procedures a supervisor has written: reinforcement, discrete-trial and naturalistic teaching, chaining, prompting, shaping, discrimination training, generalization and token economies.
What is the difference between shaping and chaining?
Shaping gradually changes one behavior by reinforcing closer and closer approximations, such as moving from a sound to a full word. Chaining teaches a sequence of different steps in order, such as the steps of washing hands, using a task analysis.