Home / RBT Study Guide / Behavior Acquisition / Task analysis and chaining: forward, backward and total task

Domain C · Behavior Acquisition · Task C.5

Task analysis and chaining: forward, backward and total task

A task analysis breaks a skill into small steps in order. Forward chaining teaches the first step first, backward chaining teaches the last step first, and total task presentation teaches every step on every trial.

Last reviewed November 10, 2026 against the BACB RBT Test Content Outline (3rd ed.)

What a task analysis is

A task analysis breaks a complex skill into a sequence of smaller, teachable steps. Each step is one observable action, written clearly enough that two people watching would agree on whether it happened. The finished sequence is called a behavior chain.

In a chain, every step does two jobs. Finishing a step is the cue for the next one, and it also works as a conditioned reinforcer for the step just completed. Running water is the cue to wet your hands. The reinforcer at the very end (clean hands, a tied shoe, a snack you made yourself) holds the whole chain together.

Your supervisor writes or approves the task analysis and fits it to the learner. One client may need handwashing in 5 steps and another in 12. Here is a 7-step version used in the examples below:

  1. Turn on the water
  2. Wet both hands
  3. Pump soap into one hand
  4. Scrub hands together
  5. Rinse off the soap
  6. Turn off the water
  7. Dry hands with a towel

Three ways to teach a chain

Task C.5 in the outline names three chaining procedures: forward, backward and total task. All three use the same task analysis. The difference is which step the learner is taught first and who handles the other steps.

Forward chaining

You teach step 1 first. When the learner does step 1 to the criterion in the plan, you deliver reinforcement, and you complete or prompt the remaining steps as the plan directs. Once step 1 is mastered, the learner must do steps 1 and 2 to earn reinforcement, then steps 1, 2 and 3, and so on until the whole chain is independent.

Backward chaining

You complete, or guide the learner through, every step except the last one. The learner is taught the last step. When that is mastered, you handle all but the last two steps, and teaching keeps moving toward the start of the chain. The learner finishes the task on every trial, so every trial ends with the natural reinforcer of a completed task.

Total task presentation

The learner attempts every step, in order, on every trial. You prompt any step the learner cannot yet do alone, using the prompting procedure in the plan, and those prompts are faded over time. You may also see this called total task chaining or whole task presentation.

Forward vs backward vs total task

ProcedureStep taught firstWho completes the other stepsWhen reinforcement comes
Forward chainingThe first stepThe RBT completes or prompts the later stepsAfter the learner does the steps taught so far
Backward chainingThe last stepThe RBT completes or prompts the earlier stepsAt the end of the chain, when the task is finished
Total task presentationAll steps, every trialThe learner attempts all of them, with prompts where neededAt the end of the chain, when the task is finished

In all three, the steps are performed in their normal order, from first to last. Backward chaining does not mean doing the task in reverse. Only the order of teaching runs backward.

Worked example: Mia learns to wash her hands

In session

Forward chaining. At the sink you say, "Wash your hands." Mia turns on the water by herself (step 1). You praise her and give a token, then guide her through steps 2 to 7. After step 1 meets the criterion, the token comes only when she turns on the water and wets her hands without help.

In session

Backward chaining. You guide Mia through steps 1 to 6. At step 7 you hold out the towel and wait. She dries her hands herself, and you praise her as she finishes with clean, dry hands. Next comes step 6 plus step 7: she turns off the water and dries her hands on her own.

In session

Total task presentation. Mia attempts all seven steps every time. Today she does steps 1, 2 and 6 independently. You point to the soap for step 3, model scrubbing for step 4, and give a light physical prompt for rinsing and drying. Each step is scored separately.

What you record and what you report

Chaining data are usually taken step by step. For each step you mark whether it was independent or prompted, often with the prompt level, and the result is summarized as the percentage of steps completed independently. That step-by-step record shows your supervisor exactly where the chain breaks down.

Teach the steps as written. Do not add, drop or reorder steps on your own, even when a shortcut looks obvious. If the learner is stuck on one step for many sessions, or completes the task in a different order that still works, describe what you saw and let your supervisor decide. Changing a task analysis is a plan change, and plan changes are outside the RBT scope of practice.

How the exam tests chaining

On the exam

A common question format describes a session and asks which chaining procedure is being used. Find the sentence that says who does which steps. If the learner does only the last step, it is backward chaining. Only the first step: forward chaining. Every step with prompts as needed: total task. For the rest of this domain, see the Behavior Acquisition overview.

Common mix-up

Chaining and shaping both build behavior gradually, but they are different procedures. Chaining links several different behaviors into a sequence (turn on water, wet hands, get soap). Shaping changes one behavior little by little, by reinforcing closer and closer versions of it (from "buh" to "bubbles"). If the scenario lists steps in an order, think chaining.

Practice questions

Original questions in the style of the exam. Pick an answer before you open the explanation.

1. Sam is learning to make a sandwich from a 6-step task analysis. The RBT completes steps 1 to 5, then teaches Sam to do step 6 and praises him when the sandwich is finished. Which procedure is this?

  1. Forward chaining
  2. Backward chaining
  3. Total task chaining
  4. Response shaping
Show answer

B. Backward chaining

The RBT completes everything except the final step and the learner is taught the last step first, which is backward chaining. Forward chaining is the closest distractor, but it would start by teaching step 1, with the RBT handling the later steps.

2. Ava's plan teaches toothbrushing with total task presentation. What happens on each teaching trial?

  1. Ava attempts every step, with prompts as needed
  2. Ava performs only the first step in the chain
  3. Ava performs only the last step in the chain
  4. Ava watches the RBT complete the whole chain
Show answer

A. Ava attempts every step, with prompts as needed

In total task presentation the learner goes through every step in order on every trial, and the RBT prompts only the steps the learner cannot yet do alone. Doing only the first step describes the start of forward chaining, and doing only the last step describes the start of backward chaining.

3. Diego's plan uses forward chaining for a 5-step shoe-tying task analysis. He has just met the mastery criterion for step 1. What is taught next?

  1. Step 5, because the final step comes next
  2. All 5 steps, with prompts on every trial
  3. Step 3, to skip the step he finds hardest
  4. Steps 1 and 2, performed together in order
Show answer

D. Steps 1 and 2, performed together in order

Forward chaining adds one step at a time from the start of the chain, so after step 1 is mastered Diego must complete steps 1 and 2 in order to earn reinforcement. Jumping to step 5 confuses forward chaining with backward chaining, and prompting all five steps every trial is total task presentation.

Common questions

What is the difference between forward and backward chaining?

Both teach one step of a task analysis at a time. Forward chaining starts with the first step and adds steps in order, while the RBT completes or prompts the later steps. Backward chaining starts with the last step, after the RBT completes the earlier ones, so the learner finishes the task on every trial.

Who writes the task analysis, the RBT or the BCBA?

The supervisor (a BCBA or BCaBA) writes or approves the task analysis and chooses the chaining procedure. The RBT teaches the steps as written and records how the learner did on each one. If a step seems too big or is out of order for the learner, the RBT reports that to the supervisor.

When is total task presentation used?

Total task presentation has the learner practice the whole chain on every trial, with prompts on any step that needs them. Supervisors commonly choose it when the learner can already do many of the steps and the chain is not very long. The choice of procedure belongs to the supervisor, not the RBT.